Biaxial Polypropylene Geogrid Fence Mining Reinforcement-manufacture,factory,supplier from China

What is the difference between one-way and two-way geogrid geogrid?Uniaxial geogrid and Biaxial geogrid belong to geogrid, on the side of the roads, ports, airports, mines and other very widely used in subgrade engineering construction, that between what's the difference? The following content is easy for everybody to introduce:1, product appearanceBidirectional geogrid is two-way rashin, porous structure, square mesh grille.Unidirectional geogrid is a bearing and drawing, a square mesh is thin.2, the processing technologyUnidirectional geogrid rashin are fit together on extrusion pro

Plastic geogrid consists of biaxial geogrid and uniaxial geogrid in keeping with its structure.Biaxial geogrid is manufactured from polyethylene or immoderate density polyethylene as the principle raw fabric through the tactics of warm-soften extrusion, vertical and horizontal stretching to shape a excessive energy reinforced square mesh form.Uniaxial geogrid is made from high molecular polymer after extruded and laminated and punched into everyday mesh before longitudinal stretching.this machine makes immoderate molecule in direct line united states in square oval net shape with uniform distr

Plastic geogrid includes biaxial geogrid and uniaxial geogrid in line with its shape.Biaxial geogrid is product of polyethylene or excessive density polyethylene as the principle uncooked material through the approaches of heat-soften extrusion, vertical and horizontal stretching to form a excessive power reinforced rectangular mesh shape.Uniaxial geogrid is product of excessive molecular polymer after extruded and laminated and punched into normal mesh earlier than longitudinal stretching.this device makes excessive molecule in direct line u . s .

Uniaxial tensile geogrid is a kind of high strength geosynthetics. It is widely used in dams, tunnels, wharfs, highways, railways, buildings and other fields.1. The geogrid enhances the subgrade, which can effectively distribute the diffusion load, improve the stability and bearing capacity of the subgrade, and extend the service life;2. The geogrid can bear greater alternating load;3. Geogrid shall prevent subgrade deformation and cracking caused by loss of subgrade materials;4.

High Tensile Strength Low ElongationExcellent soil stabilizationGood sub-base reinforcementAnti-corrosion Easy to install

Concrete fibres, i.e. concrete companion fibres, are commonly used as a raw material for polypropylene resin and are specifically designed to prevent or reduce the initial plastic cracking in cement concrete, acting as a "secondary reinforcement" for cement concrete.Concrete fibres are made by blending, spinning and stretching modified masterbatch into polypropylene chips.

cement mortarInterior (exterior) wall painting, aerated concrete plastering, interior decoration putty and thermal insulation mortar.Explosion-proof and fire-resistant engineeringCivil air defense projects, oil platforms, chimneys, refractories, etc.shotcreteTunnel and culvert lining, thin-walled structure, slope reinforcement, etc.Rigid self-waterproof concrete structureBasement, side walls, roof, cast-in-place floor slab of roof, reservoir, etc.

The use of geotechnical materials is the key product of engineering construction reinforcement. Shandong LUKE composite geomembrane is a common geomembrane product. Our company has a comprehensive understanding of the laying knowledge of composite geomembrane, especially the main impact in the aging factors and water quality of Shandong LUKE composite geomembrane.The water quality has little effect on the material, and when tested in water with a pH of 2-10, the material aging has little effect.

Polypropylene fiber can be divided into lengthy fiber, quick fiber, spun viscose non-woven material, melt blown non-woven material, and many others.Polypropylene lengthy fiber can be divided into normal long fiber and pleasant denier long fiber (monofilament size ≤ 2.2 dtex, which can be used to produce filament products for apparel and ornament and a few industries. polypropylene nice denier long fiber has top luster, gentle experience, properly drapability, and occasional density, which is suitable for the knitting industry.

(1) Light weightThe density of polypropylene fiber is 0.90-0.92 g/cm3, which is the lightest among all chemical fibers. It is 20% lighter than nylon, 30% lighter than polyester, and 40% lighter than viscose fiber.