Polypropylene Mesh Fiber For Construction-manufacture,factory,supplier from China

135g 145g Fiberglass Mesh Roll to VietNam135g 145g Fiberglass Mesh Rolls ship to VietNam.Fiberglass mesh is mainly alkali-resistant fiberglass fabric,it made of the C or E glass fiber yarn through a special weaving technique,then coated by the anti-alkali and reinforcing agent and treated by high temperature heat finishing.It’s ideal engineering material in construction and decoration industry!1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen)2. Reinforced cement products.3.

In the winter season, because of its climate, environment and other factors, there will inevitably be some difficulties during construction. For example, when constructing geogrids, we have to work hard to face many problems. . In areas with repeated freezing and thawing, when the day and night average temperature is below -3°C for more than 10 consecutive days, subgrade construction is called subgrade winter construction. When the day and night average temperature rises above -3°C, but the frozen soil is not completely melted, Construction is also carried out in winter.　　 1.

This is our Polypropylene Mesh Fiber,It is with many netlike structure inside and made by 100% new polypropylene from special technology,It appears netlike structure with many mono-filaments connected.Polypropylene Mesh Fibers are widely used in concrete pavement,airport runway,shotcrete projects. Normally it is white color and the length is about 20 mm.Our Polypropylene Mesh Fibers have been tested by customers, have been recognized by customers and successfully entered the US market.If you are interested in our products, or are looking for this product, please trust us an

(1) Light weightThe density of polypropylene fiber is 0.90-0.92 g/cm3, which is the lightest among all chemical fibers. It is 20% lighter than nylon, 30% lighter than polyester, and 40% lighter than viscose fiber.

Polypropylene fiber can be divided into lengthy fiber, quick fiber, spun viscose non-woven material, melt blown non-woven material, and many others.Polypropylene lengthy fiber can be divided into normal long fiber and pleasant denier long fiber (monofilament size ≤ 2.2 dtex, which can be used to produce filament products for apparel and ornament and a few industries. polypropylene nice denier long fiber has top luster, gentle experience, properly drapability, and occasional density, which is suitable for the knitting industry.

What is the difference between one-way and two-way geogrid geogrid?Uniaxial geogrid and Biaxial geogrid belong to geogrid, on the side of the roads, ports, airports, mines and other very widely used in subgrade engineering construction, that between what's the difference? The following content is easy for everybody to introduce:1, product appearanceBidirectional geogrid is two-way rashin, porous structure, square mesh grille.Unidirectional geogrid is a bearing and drawing, a square mesh is thin.2, the processing technologyUnidirectional geogrid rashin are fit together on extrusion pro

Polypropylene fiber can be divided into long fiber, short fiber, spun viscose non-woven fabric, melt blown non-woven fabric, etc.Polypropylene long fiber may be divided into normal long fiber and nice denier long fiber (monofilament size ≤ 2.2 dtex, which can be used to supply filament products for apparel and ornament and a few industries. polypropylene best denier lengthy fiber has proper luster, gentle experience, top drapability, and occasional density, that is suitable for the knitting enterprise. when it is interwoven with cotton, viscose silk, real silk, spandex, and many others.

In the early days, propylene polymerization could only produce paper-based products with low polymerization degree, which were non crystalline compounds and had no practical value. In 1954, Ziegler and Natta invented Ziergler Natta catalyst and made it into crystalline polypropylene, which has high stereoregularity and is called isotactic polypropylene or isotactic polypropylene.

For the geomaterials market, geomembranes are the best-selling products.Customers from all over the world are interested in geomembranes.Our company has always insisted on "quality first, customer first", so we insist on 100% new raw materials, after strict testing and supervision, put the raw materials into production, and then through strict technology and production, produce high-quality HDPE geomembrane .Our products are exported to more than 30 countries and regions around the world, and are mainly used in Landfill, Petroleum wastewater treatment, Fish pond constr

Concrete PP fiber is a polypropylene as the main raw material, adopting unique manufacturing process to make high strength bundle mono-filament fiber.Join concrete (or mortar) can effectively control concrete (or mortar) micro-cracks which is caused by plastic shrinkage,temperature changes and other factors, to prevent and inhibit the formation and development of cracks, greatly improved crack resistance of concrete, impact resistance and seismic capacity.Polypropylene Fibers have many advantages in concrete construction:1. Easy to be dispersed in mortar or concrete and no agglomeration,