Polypropylene Micro Fiber Reinforced Concrete

product introduction

    Concrete PP fiber is a polypropylene as the main raw material, adopting unique manufacturing process to make high strength bundle mono-filament fiber.

    Join concrete (or mortar) can effectively control concrete (or mortar) micro-cracks which is caused by plastic shrinkage,temperature changes and other factors,to prevent and inhibit the formation and development of cracks, greatly improved crack resistance of concrete, impact resistance and seismic capacity.

Length:  for motor: <12 mm; for concrete: >12 mm

Compounding amount: for resisting the common cracks on surface, 0.9 kg/ m³ fibers to cement mortar are enough.

Stirring requirement: the proportion of cement, sand and aggregate is no need to be changed.Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2-3 minutes in order to make the compound mix completely.Also it can be mixed even with cement and other aggregates in advance, stirring by adding water at work-site before constructing.

Parameter

Applications:

A). Suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.

B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool,

pond and ditch.

D). Suit for any mortar projects and common concrete projects.

E). Highway, bridge and other roads.